What is Refresh?
Also known as: Refresh, Full Refresh, Full-Refresh, Partial Refresh, Page Refresh, Screen Refresh, Display Refresh

In a nutshell
What is a refresh?
A refresh is the moment when an E Ink display builds a new image, for example when turning a page. Unlike a smartphone or computer screen that redraws its image 60 times per second or more, an E Ink display only changes when something actually needs to change. In between, the image simply stays there without power.
That's why "refresh" on an eReader is not the same as the refresh rate in hertz on monitors. Here it means every single image change.
Partial refresh and full refresh
E Ink readers know two basic ways to update the image:
| | Partial refresh | Full refresh |
|---|---|---|
| What happens | Only the pixels that change are switched | All pixels are completely reset |
| Recognizable by | Smooth, fluid page turn | Brief black flash |
| Speed | Faster | Slightly slower |
| Image quality | Small remnants of the previous page possible | Clean, high-contrast image |
The partial refresh is the normal case when turning pages because it is fast and pleasantly unobtrusive. However, not all color pigments land exactly in their place. From page to page, these small inaccuracies accumulate, and pale shadows of the previous pages appear, the so-called Ghosting.
The full refresh cleans that up. It resets every single pixel, and the image is clean again.
Why does the display flash black?
The flashing is not an error, but part of the full refresh. An E Ink display consists of tiny capsules with black and white pigments that migrate up or down via electrical voltage. To reliably bring all pigments into a defined starting position, the reader briefly switches all pixels completely, usually from black to white, and only then builds the new page.
To your eye, this looks like a brief negative image or black flickering. It only lasts a fraction of a second.
Display modes: How the eReader chooses between speed and quality
Behind every image change is a so-called waveform mode, i.e. a precisely defined sequence of voltage pulses. The eReader selects the appropriate mode depending on the situation:
| Mode | Characteristics | Typical use |
|---|---|---|
| GC16 | Full 16 gray levels, very clean, with flashing | Full refresh |
| GL16 / Regal | Full gray levels, hardly any flashing, little ghosting | Normal page turning |
| DU | Only black and white, fast | Menus, keyboard, highlighting |
| A2 | Only black and white, very fast, more ghosting | Scrolling, stylus input |
A milestone was the Regal mode from E Ink, which has existed since the Carta displays. It reduces ghosting during normal page turning so much that a full refresh is needed much less often. Manufacturers develop their own methods for this: Kobo calls its anti-ghosting technology FastGLR, for example.
Normally you don't have to worry about these modes. With Android eReaders like those from Onyx Boox, you can sometimes choose them yourself, such as a fast mode for browsing the web.
How to set the refresh on your eReader
With most eReaders, you can set how often a full refresh occurs. You usually find the option in the reading or display settings, depending on the manufacturer, for example under "Page refresh" or "Full refresh".
Typical options are a full refresh after every page or only after several pages, for example every six pages. Our recommendation:
- Novels and plain text: A refresh every few pages is completely sufficient. Reading remains calm, and ghosting is hardly noticeable with text.
- Comics, manga, PDFs with images: Set the refresh to every page. Large dark areas otherwise leave clear shadows.
- Color eReader: With color displays like Kaleido 3, residue is often more visible. A more frequent refresh is particularly worthwhile here.
- Dark mode: White text on a black background shows ghosting more clearly; a more frequent refresh helps here too.
Quick tip: If you suddenly see shadows, briefly switch to the menu and back to the book. On many eReaders, this triggers a full refresh.
Does a frequent refresh use more battery?
A little, but hardly noticeable in everyday use. An E Ink display only needs power when the image changes, and a full refresh is somewhat more complex than a partial refresh. But the biggest impact on battery life comes from the Frontlight and Wi-Fi. So if ghosting bothers you, you can safely set the refresh to every page.
When a refresh no longer helps
If image remnants remain permanently visible even after several full refreshes and a device restart, it is probably not normal ghosting. This can indicate display damage, for example after a fall or pressure on the display. In this case, it is worth checking your manufacturer's warranty terms.
Even in cold temperatures, the image build-up becomes sluggish: The pigments move more slowly at low temperatures, page turns take longer, and ghosting increases. As soon as the reader is back at room temperature, everything is normal again.
What is a refresh on an eReader?
A refresh is the image build-up on an E Ink display. During a full refresh, the eReader resets all pixels and thus removes shadows of previous pages.
Why does my eReader flash black when turning pages?
That is a full refresh. The reader briefly switches all pixels to get the pigments cleanly into their starting position. This is not a defect, but ensures a clear image.
How often should the eReader do a full refresh?
For novels, a refresh every few pages is enough. For comics, PDFs with images, in dark mode, and on color eReaders, a refresh after every page is worthwhile.
Does a frequent refresh use more battery?
A little, but hardly noticeable in everyday use. Frontlight and Wi-Fi have a much greater impact on battery life.
What is the difference between partial refresh and full refresh?
In a partial refresh, the reader only changes the necessary pixels; this is fast but can cause ghosting. The full refresh resets all pixels and ensures a clean image, recognizable by the brief flash.